Fully Automatic Baling Machine-manufacture,factory,supplier from China

As a high-efficiency and high-precision welding equipment, the fully automatic welding machine will bring the following benefits to users:1. Improve welding quality: Fully automatic welding machines can achieve precise welding parameter control, resulting in more stable and higher-quality welds. Due to the high repeatability of the robot and the good consistency of the welds, human operating errors can be greatly reduced and the quality of the welding is guaranteed.2.

Main components and parametersName DescriptionThe main body of the frame is welded from 80x80x3 square tubesConveyor belts are all made of thickened anti-skid conveyor beltsTurning lever Q235 plate is laser cut and processedMaterial turning lift is powered by pneumatic liftingThe drive shafts are all made of 45# steel, and the surface is plated with Luo.Slideways adopt precision square railsScrew 2525 ball screwLift servo motorThe hot melt balerName DescriptionPower supply, power 220v/50Hz 500wPacking speed ≤1.5 seconds/laneApplicable strap thickness (0.45-1.0) mm*width (9-15) mmFeatures: Neve

Our welding machine uses six welding guns for simultaneous welding. There are three welding guns on each side distributed on both sides of the fuselage. All transmission methods are driven by servo motors, which greatly improves the accuracy of the motion trajectory. Our welding machine uses mechanical double positioning, which greatly improves the welding accuracy. Our welding method can be used for spot welding and full welding. The 6 welding guns can be controlled arbitrarily and use servo positioning.

Are you looking for efficient and reliable equipment for producing cable trays? Look no further! Our fully automatic cable tray production equipment is the perfect solution for your manufacturing needs.With advanced technology and state-of-the-art features, our equipment ensures high productivity and precision in cable tray manufacturing. Here are some key features and benefits of our fully automatic cable tray production equipment: 1. High-speed production: Our equipment is capable of producing cable trays at a high-speed rate, maximizing your manufacturing capacity.

It has a bale density pressurization system and adopts German technology. The bale weight can reach about 70-120 kilograms. Equipped with a rear camera and a cab monitoring display screen, the baling situation can be monitored in real time.The supporting power is 120kw, the power is 160 horsepower, and the power output speed is 850-1100 rpm.

1. Hydraulic core expansion 2. Electric discharge3. Bearing capacity 8 tons 4. Distribution box (frequency conversion control, slow start and slow stop) 5. Hydraulic 2.2KW setRoll inner diameter: φ508mm; inner diameter expansion and contraction range ф450-500;Maximum outer diameter of material roll: φ1250mm;

Our production equipment adopts advanced automation technology and is able to realize a fully automated production process. The equipment is equipped with advanced electrical control systems and mechanical transmission systems, which can realize multiple process steps such as automatic cutting, bending, and forming of cable trays. Automated production not only improves production efficiency, but also reduces labor intensity and ensures the stability of product quality.Secondly, our production equipment is highly adaptable and flexible.

1. Streamlined fuselage, plastic-sprayed fuselage, and car-painted fiberglass outer cover, impressive; high operating efficiency, 3,000-5,000 bundles a day.2. The steel plate of the whole machine is made of special plate for automobiles, cranes and bridges, which has good toughness, durability and fatigue resistance.3. The bale density pressurization system adopts German technology, and the bale weight can reach about 70-120 kilograms. Equipped with a rear camera and a cab monitoring display screen, the baling situation can be monitored in real time.4.

The Fully Automatic Perforated Cable Tray Forming Machine is a latest answer designed for environment friendly and specific manufacturing of cable tray systems. This today's desktop combines superior automation science with super substances to create a dependable and budget friendly answer for cable administration needs.1.

A pasture baler is a specialized piece of equipment used to bale pasture or hay into a compact package that is easy to store and transport. It works by baling loose forage into strong, tight bales to make it easier for farmers to store, transport and sell.The working principle of the forage baler is to feed the cut forage into the machine from the feed port, and then through a series of cutting, compacting and bundling of working parts, finally form a strong bale.

Tired of manually punching holes? Look no further, the automatic punching machine is a revolutionary tool that simplifies and optimizes your punching tasks. The automatic punching machine is a cutting-edge device designed to save you time and energy. With its advanced technology, the machine can automatically punch holes in metal sheets. Say goodbye to the hassle of hand punching and hello to a more efficient and accurate method. A key feature of the automatic punching machine is its user-friendly interface.

This product is the 1845XD three-row rope bale picking and pressing machine produced by Bazhou Zhike Qida Automation Equipment Manufacturing Co., Ltd. It mainly consists of a picker, a pitchfork, a compression piston, a compression chamber, and an automatic knotter. , transmission system, hydraulic system, control system, overload safety protection device, etc.

Process flow and characteristics:Winding → Leveling → Disk cutting strip → Waste edge winding → Tension → Coiling → Unloading1、This machine and equipment is a complete set of process machinery and equipment, which can produce a variety of qualified hot steel coils of different specifications, cold-dip galvanized steel coils, Q235, color steel coils, color-coated coils, aluminum coils, stainless steel coils, etc. 2、This machine adopts more automatic hydraulic controls and pneumatic controls, which reduces the weight of the equipment, simplifies the structure of the equipment, reduces labor

main component1、Open winding machine，load-bearing ten tons of electric hydraulic open rolling machine2、Leveling and cutting machine，13 roller leveling, hydraulic cutting, tray punching Section A high-speed 3、platform， high-speed platform 2 branches, frequency conversion control4、Punch machine，hydraulic system (7.5kw2 sets), mold pneumatic conversion single and double row, oil cylinder heavy engineering cylinder, typing (trademark Section 5、 high-speed platform，high-speed platform 2 (1 electric 0.75kw, 1 passive), the width of the positive and reverse wire rod is adjusted6、 Roller for

Are you worn-out of dealing with messy cables and wires in your domestic or office? Look no further! Our customized cable bridge gear is the ideal answer to prepare and guard your cables.With our cable bridge equipment, you can say goodbye to cable entanglement and tripping hazards. Our modern format permits for convenient set up and customization to suit your precise needs.

1. Uncoiler, manual core starting, load bearing 4 tons, distribution box (frequency conversion control slow stop)2. Leveling machine, 11 roller leveling (3 upper and 4 lower), power 4.0KW3. Integrated punching and cutting machine - code feeding forward rotation mechanism (forward and reverse screw), hydraulic punching, punching die manual pin conversion single and double row, hydraulic cutting, typing (trademark) (optional)4. High-speed platform - high-speed platform, forward and reverse wire width adjustment, frequency conversion control5.

U-shaped cold bending forming machine is a mechanical equipment specially used to bend metal materials (such as steel plates, aluminum plates, etc.) into U-shaped cross-sections. It uses advanced automatic control technology and high-precision forming molds to quickly and accurately complete the cold bending forming process of metal materials. The machine has the following main features and functions: 1. Efficient production: U-shaped cold bending forming machine uses automation technology to achieve continuous and efficient production.

1. Automated Perforation: The machine is equipped with advanced perforation technology, allowing for precise and consistent hole punching in the cable trays. This feature ensures accurate alignment and perfect hole sizes, effectively reducing the need for manual adjustments or rework. 2. Versatile Design: With its flexibility and adaptability, the machine can produce various types and sizes of cable trays. It can be customized to accommodate different dimensions, designs, and material thicknesses, allowing for seamless integration into any cable management project.3.

Are you searching for environment friendly and dependable tools for producing cable trays? Look no further! Our wholly computerized cable tray manufacturing tools is the best answer for your manufacturing needs.With superior technological know-how and trendy features, our gear ensures excessive productiveness and precision in cable tray manufacturing.

Product nameCable tray roll forming machineRoller materialCR12,hand chrome coatedMaterial thickness0.5-3.0mmMaterial typeGalvanized steelControl systemPLCRoller stations24 stationsMotor power75KWCutting systemHydraulic cuttingHighlight Galvanized steel sheet roll forming machineSchematic diagramfeature:1. Product name: Cable tray roll forming machine2. Motor power:3. Roller material: CR12, hard chrome plated4. Cutting system: hydraulic cutting5. Material thickness: 0.5-3.0mm6. Material type: galvanized steel plate7.

main component:1. Hydraulic decoiler, bearing capacity 10 tons2. Leveling and feeding machine3. Pneumatic gantry punch press, choose well-known brands4. Conveyor platform5. Punching machine6. Conveyor platform7. Roll forming part, the main shaft diameter is 80mm, the surface is hard chrome plated, and there are 35 forming rollers8. Unloading rackThe perforated cable tray forming computer with punch press is a piece of gear mainly used to produce perforated cable trays.

Equipment overview1. Through-shaft design, the production width and height of the machine are electrically adjusted, making it easy to control.2. The rolling station is level 25. The main machine is composed of AC motor, reducer, high-precision linear guide rail, left and right transmission boxes, horizontal adjustment system, rolling mold, etc. The machine base and transmission adopt welded structure and are hardened. The roller material for CR123.

1. High-precision cutting: The longitudinal cutting machine is equipped with advanced technology and can achieve precise cutting on metal materials. Ensure accurate and clean cuts. 2. Adjustable cutting speed: This machine allows users to adjust the cutting speed according to their specific requirements. It offers a range of cutting speeds to suit different materials and thicknesses, ensuring maximum efficiency and quality. 3. User-friendly interface: The longitudinal cutting machine has a user-friendly interface, allowing the operator to easily control and monitor the cutting process.

1. Uncoiler, hydraulic core expansion, distribution box (frequency conversion control slow rise and slow stop), hydraulic 3KW set, load-bearing 8 tons2. Leveling and cutting machine, 13-roller leveling, hydraulic system 11KW, 2 sets of electric valves, 7.5KW motor, hydraulic cutting, pallet punching3. A-section high-speed platform, 2 high-speed platforms, forward and reverse screw width adjustment, frequency conversion control4. Punch machine, 3 motors, distribution box, mold pneumatic conversion single and double row, oil cylinder heavy engineering oil cylinder5.